Texan Boot Designer
from $7.00
sale
This is one cutter of a Texan Cowboy Boot, with detailed stamp.
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates
Cutter Length:
Quantity:
This is one cutter of a Texan Cowboy Boot, with detailed stamp.
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates
This is one cutter of a Texan Cowboy Boot, with detailed stamp.
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates
Facing to the right as per in picture, or you can get facing the left or both. The one pictured is the RIGHT cutter.
10mm height
Made with PLA.
All measurements are for inside cutting space:
Select size on drop down. 30mm, 35mm, 40mm 0r 45mm.
All cutters have a sharp cutting edge.
Clean with warm soapy water.
Due to the nature of the detail on these cutters, you may need to use some cornflour or water, ensure clay is not too soft or it can result in sticking. I use the cutters without anything and just ensure I lift straight up.
Please allow variations of about 1mm for sizing due to the nature of 3D cutters.
All cutters are made in Melbourne.
Colours are sent at random.
Cutters are not dishawasher safe, handwash in warm water.
Tag us on Instagram with your purchase for your chance to win a prize in our giveaways. @claudiecreates